gutter inspection

How to Inspect Your Gutters

The reason we all get downspouts and gutters installed is so they can manage run-offs.

However, gutters will hardly be able to do this if they’re damaged or clogged. Can you see why it is very important to get the gutters cleaned up every now and then?

When gutters stop working like they should, you’ll be left with lots of leakages, puddling and even your house may be put in danger.

If you do not want this to happen, ensure that you inspect and clean your gutter at least 2 times in a year.

cleaning gutters

To clean your gutter effectively, you’ll need some specialized tools. You may read a more detailed guide about gutter cleaning tools on vacuumcleaners4u.co.uk. You may need to do this more often, especially if there are a tree shedding leaves nearby.

Inspecting your gutter is not difficult–as long as you know how to do it. Here’s how to check your gutter if you are not sure about what to do.

Items you’ll Use


  • Gloves
  • Ladder
  • Hose
  • Plumber’s snake (may not be necessary)
  • Bucket or Tarp
  • Gutter cleaning tools

7 Steps to Inspect Your Gutter


Step 1: Ensure your ladder is planted firmly on the ground before climbing it. Also, get a spotter.

Step 2: Pack debris away from the gutter and pour them into a bucket. Note that you are to attach the bucket securely to the ladder, so it doesn’t fall and cause a mess. You can also dump the materials on a tarp placed on the ground.

Step 3: Use a hose to flush out smaller debris. While doing this, observe the gutter’s underside for leaks even as you ensure that the water flows freely across the downspout.

Step 4: If you notice that the water isn’t flowing well, you’ll need to unblock the downspout.

To do this, remove the downspout from the underground pipe if it connects to one.

Spray water at high speed with a hose to wash away dirt. If a hose doesn’t work effectively enough, get a plumbing snake.

Step 5: Slow-moving or stagnant water is a sign that your downspout does not have enough slope. So, adjust the hangers or spikes so that the downspout will be sloppier and cause water to move.

Step 6: Check whether there’s any space between your gutter and the fascia. Hangers and spike may become loose after a while.

If this is the case, you have to change or resecure them.

Sep 7: Look for gutter parts like ends and seams where there are leaks or missing sealant. You can repair leakages along the end caps and seams of your gutter by replacing old sealants with new ones.

If there are holes on the fibreglass’ body, it’ll require more complex procedures to remedy the damage.

The Conclusion: Clean your gutter only when the debris is dried up and there’s not been rain for days. Gloves will protect your hands from soggy debris so wear them. Don’t forget to use the ladder cautiously and everything will go well.

Leave a Reply

Your email address will not be published. Required fields are marked *